Electronic time delay safe locks with biometric fingerprint opening E-26E
Electronic gun safe lock with time delay function
Up to 10different user codes can be set
The user code can be set from 4 digits to 10 digits number
Any user code can be deleted seperately
Time delay function can be set from 01 minutes to 99 minutes
The master code (4-10digits) can be changed
Single user opening mode or dual control mode
30 PCS Fingerprints can be registered maximuly
The safe can be opened by digital code , or fingerprints or code plus fingerprints
Any fingerprints or code can be deleted and programmed
Low battery warning
Wrong code input lockout function.
Yosec time delay lock which means that it is a feature requiring a period of time to elapse before the lock system can be opened, so it is to prevent a user being foreced to open the lock immediately. The time dealy period can be set from 01-99 minutes, the opening window is the period of time after time delay has expired during which the lock can be opened which can be set from 1-99 minutes. Low battery warning if the battery is running lower, repeated beeping during opening will indicate the need to replace the battery. Penality entry of 4 consecutive incorrect codes results a five minutes penalty-all lock functions are disabled.
During penalty the LED flashes at 10 second intervals and a key press will result in 3 beeps. After penalty has expired. 2 further consecutive incorrect codes will initiate the penalty. Once a correct codes is entered , the penalty trigger resets to four woring tries. Check user status, the status of users , whether enabled, disabled , or deleted maybe audited using the keypad
| It's ideal to be assembled onto the office safe, home safe, and hotel safes. Easy operation. |
| * Open/close by fingerprint or pin code/face unlock |
|
* Also could open/close by 1 to 8 digits code
*Two modes to open the door:Open the door by the fingerprint or the code/Open the door by the fingerprint and the code |
| * 30 fingerprints could be stored |
| * 2pcs override emergency cross keys |
| * A plate covers the key hole |
| * 2*Φ20mm lock pins to prevent the tampering |
| * 4 "AA" batteries included |
| * Low battery power warning |
fingerprint safe electronic combination lock for safe box
Knob can be hidden inside the keypad , only press it can pop-out
Electronic Hotel Safe Lock With Password and Fingerprint
Keywords: Gun safe lock, electronic safe lock, time delay safe lock, Chinese safe lock
Electronic gun safe lock with time delay function
Brass color for time delay lock is widely installed on safe vaults
Factory default status:
1. The user code is 1234 , the master code is 123456
2. Face ID is blank( any face can open)
3. The opening mode is single mode(code or face)
Set menu :(Green button is reset button)
Press the green reset button and enter master code and press"#" to enter set mode:
Press"1" to change user code , enter your new 3-6 digits user code and press"#"to confirm, then
enter the new code again and press"#" to confirm.("*" button to clear all entered), the green light will be on
if changed successfully.
Press"2" to register face ID(100 pcs maximum) , please keep your eyes flatly with camera scanner,
the green light will be on if registered successfully , if failure it will DIDI and register again.
Pres"3" to delete all your face ID
Press"4" to change master code , enter your new 1-8 digits master code and press"#"to confirm,
then enter the new code again and press"#" to confirm.("*" button to clear all entered), the green light will
be on if changed successfully.
Press"5" to change opening mode , press"1" is single mode(code or face) to open , press"2" is dual
mode(face+code) to open
If quit the set mode , please press"8"
How to open by code or face:
A: Face to open:
Touch the keypad and press"*" , now keep your eyes flatly with the camera scanner with
distance30-50cm , the green light will be on if recognized successfully . If failure please try it again
B: Code to open:
www.yosec-safe.comTouch the keypad and enter your user/master code and press "#" to confirm , the green light will be on
if the code is correct , then turn the handle or key to open it .
C: Code+face to open:
Touch the keypad and enter your user/master code and press "#" to confirm ,then keep your eyes
flatly with the camera scanner , the green light will be on if correct , then turn the handle or key to open it .
D: Face+code to open:
Touch the keypad and press"*" now keep your eyes flatly with the camera scanner, the keypad will be
light on if recognized successfully , then enter your user / master code and press"#" to confirm , the green
light will be on if opened
Alarm function:
Touch the keypad and press"#" button, the alarm will be working , if the safe is vibrated , it will alarm.
3 wrong codes entered it will alarm 1 minutes , only correct code or face ID can get rid of alarm.
Low battery warning:
After enter code or face recognition the red light will flash , it means the battery is lower , please
replace new batteries as soon as possible
System initialization:
Press green reset button longer until you hear the voice remind, now the green light and blue set
light will be on , now all face ID is deleted and the code is recovered to be factory default mode(user code
is 1234 and master code is 123456
){kind=link}
){kind=link}